Battery – Yaskawa MP940 Hardware Manual User Manual
Page 13
Advertising
MotionSuite™ MP940 Machine Controller Hardware Manual
Section 2: Startup
10
Battery
A battery is needed during absolute encoder use for both MP940 and SGDH position
data memory.
The batteries are required under the conditions listed below:
SGDH
MP940
Usage Method
No
No
• FLASH Operation
• Incremental encoder, or absolute encoder used as an
incremental encoder.
No
Yes
• No FLASH Operation (RAM used)
• Incremental encoder, or absolute encoder used as an
incremental encoder.
Yes
No
• FLASH Operation
• Absolute encoder used.
Yes
Yes
• No FLASH Operation (RAM used)
• Absolute encoder used.
Figure 2.6: MP940 and SGDH Batteries
MP940
SGDH Servo
Amplifier
MP940 Module
Battery for absolute
encoder position data
memory
Battery for RAM data
backup and position
data memory
Advertising