Yaskawa V1000-Series Option SI-EP3/V PROFINET - Manual (Page 10)

10 YASKAWA TOEP YEACOM 06A V1000 Option PROFINET SI-EP3/V Installation Manual
2 Product Overview
2 Product Overview
◆
About This Product
The SI-EP3/V option connects the V1000 drive to a PROFINET network and facilitates the
exchange of data.
This manual explains the handling, installation and specifications of this product.
The SI-EP3/V option is a simple, networking solution that reduces the cost and time to wire
and install factory automation devices, while providing interchangeability of like
components from multiple vendors.
By installing the option to a drive, it is possible to do the following from a PROFINET
master device:
• Operate the drive
• Monitor the operation status of the drive
• Change parameter settings.
SI-EP3/V is PROFINET Conformance Class A certified.
◆
Applicable Models
This option can be used with the drive models in Table 1 .
Table 1 Applicable Models
Drive Software Version <1>
<1> See “PRG” on the drive nameplate for the software version number.
CIMR-VAAA
CIMR-VABA
CIMR-VAFA
CIMR-VAJA
CIMR-VALA
 1012
CIMR-VAGA
CIMR-VAHA
508