10 web interface – Yaskawa V1000-Series Option SI-EP3/V PROFINET User Manual
Page 54
10 Web Interface
54
YASKAWA TOEP YEACOM 06A V1000 Option PROFINET SI-EP3/V Installation Manual
■
Parameter Access Tab
The Parameter Access tab allows the user to read and write parameters from the drive. Write
access is restricted until a valid password is entered.
Figure 48
Figure 48 Parameter Access Tab View
The Modbus address for the drive parameter being accessed must be entered in hexadecimal.
The number must begin with “0x” to signify hexadecimal.
Clicking “Read” will load and display the current value of the given Modbus Address.
Clicking “Set” will save the given value to the given Modbus address.
After a “Read” or “Set” command is given, Status will display “Waiting” while the action is
being carried out, then “Complete” is displayed when finished.