Yaskawa V1000-Series Option SI-EP3/V PROFINET - Manual (Page 21)

5 Installation Preparation
YASKAWA TOEP YEACOM 06A V1000 Option PROFINET SI-EP3/V Installation Manual 21
4.
Tool requirements. Select tools for your enclosure type and model, refer to
Table 6 . Next, go to the chosen installation Procedure A on page 22 or Procedure
B on page 33 from STEP 3.
Note: Tools required to prepare the option cables for wiring are not listed in this manual.
Table 6 Tool Requirements
Model Number
Enclosure Type Digit
Drive Enclosure Type Drive Capacity Tools
A, B IP20/Open-Chassis
All
Phillips screwdriver -
M3 metric/#1, #2 U.S. standard
size
<1>
<1> Screw sizes vary by drive capacity. Select a screwdriver appropriate for the drive capacity.
F IP20/NEMA Type 1
G NEMA Type 4X/IP66
2A0030G/H
2A0040G/H
2A0056G/H
2A0069G/H
4A0018G/H
4A0023G/H
4A0031G/H
4A0038G/H
10 mm socket wrench
Phillips screwdriver -
M3 metric/#1, #2 U.S. standard
size
<1>
Other capacities
8 mm socket wrench
Phillips screwdriver -
M3 metric/#1, #2 U.S. standard
size
<1>