Yaskawa V1000-Series Option SI-EP3/V PROFINET - Manual (Page 32)

6 Procedure A
32 YASKAWA TOEP YEACOM 06A V1000 Option PROFINET SI-EP3/V Installation Manual
18.
Attach the option cover by aligning the tabs with the mounting holes, seat the front
cover into place, and tighten the screw on the front.
Figure 25
Figure 25 Attach the Option Cover
NOTICE: Damage to Equipment. Take proper precautions when wiring the option so that the front covers
will easily fit back onto the drive. Make sure no cables are pinched between the front covers and the drive
when replacing the cover. Failure to comply may result in damage to circuitry and equipment.
19.
Set drive parameters in Table 10 on page 43 for proper option performance.
20.
End of installation Procedure A.
Line up tabs