Yaskawa V1000-Series Option SI-EP3/V PROFINET - Manual (Page 19)

5 Installation Preparation
YASKAWA TOEP YEACOM 06A V1000 Option PROFINET SI-EP3/V Installation Manual 19
◆
Prior to Installing the Option
Prior to installing the option, wire the drive, make necessary connections to the drive
terminals, and verify that the drive functions normally without the option installed. Refer to
the product manual packaged with the drive for information on wiring and connecting the
drive.
◆
Choosing the Correct Installation Procedure
The installation procedure differs between NEMA 4X and IP00/IP20 enclosure types. The
enclosure type is identified within the drive model number. Refer to STEP 1. and Figure 6
on page 20 to identify the drive enclosure type.
1.
Locate the drive model number using Figure 4 and Figure 5 . Record the model
number for use in STEP 2.
Figure 4
Figure 4 Model Number Location: IP00/IP20 Open Chassis and IP20/NEMA Type 1 Enclosure
Figure 5
Figure 5 Model Number Location: NEMA 4X Enclosures
Model Number
Location
CIMR-VUBA00012GAA
200V 1PHASE 12 0A/11.0A S/N J013ZB797110004
Model Number
Location