Yaskawa V1000-Series Option SI-EP3/V PROFINET - Manual (Page 20)

5 Installation Preparation
20 YASKAWA TOEP YEACOM 06A V1000 Option PROFINET SI-EP3/V Installation Manual
2.
Use Figure 6 to find the digit within the model number that identifies the enclosure
type. Record the enclosure type for use in STEP 3.
Figure 6
Figure 6 Drive Enclosure Type Identification
3.
Use the enclosure type digit recorded from STEP 2. and Table 5 to select the
correct installation Procedure A on page 22 or Procedure B on page 33 .
Table 5 Installation Procedure by Enclosure Type
Model Number-Enclosure Type Digit Drive Enclosure Type Installation Procedure
A, B IP20/Open-Chassis Procedure A on page 22
F IP20/NEMA Type 1 <1>
<1> Installing the option on an IP20/NEMA Type 1 enclosure drive voids NEMA Type 1 protection while maintaining
IP20 conformity.
Procedure A on page 22
G NEMA Type 4X/IP66 Procedure B on page 33
CIMR - V U 2 A 0001 F A A
Drive V1000
Series
No.
Customized
Specifications
A Standard model
Design
Revision
Order
No.
Region
Code
A Japan
No. Voltage Class
B 1-phase, 200-240 Vac
3-phase, 380-480 Vac
3-phase, 200-240 Vac 2
4
B China
C Europe
T Asia
U USA
<1> Refer to manual TOBPC71060635 for more information on these models.
<2> Refer to manual TOBPC71060621 for more information on these models.
<3> Drives with these specifications do not guarantee complete protection for the specified environmental condition.
No.
Environmental
Specification <3>
A
M
N
S
Standard
Humidity- and
dust-resistant
Oil-resistant
Vibration-resistant
No. Enclosure Type
IP00/Open-Chassis
B
A
IP20/Open-Chassis
F IP20/NEMA Type 1
J IP20/Finless <2>
L IP00/Finless <2>
NEMA 4X/IP66 <1> G
Drive capacity
F