Sealey VS8622 - Manual (Page 11)

If no codes are detected, a “No codes are stored in the
module!” message displays on the screen.
If the code definition is not found in the built in DTC library,
a “DTC definitions not found! Please refer to User's
Manual!” message comes up prompting you to look up the
definition in the vehicle service manual.
6) Press N button to return to previous menu.
B. Erasing Codes
CAUTION: Do not erase the codes before the system has been
checked completely by a technician.
This function is performed with key on engine off (KOEO). Do not
start the engine.
1) Use UP/DOWN button to select Erase Codes from Diagnostics
Menu and press Y button.
2) A warning message comes up asking for your confirmation.
............. Erase Codes ............. ...
Erase trouble codes!
Are you sure?
YES NO
............ Select Function ...... ...
2/5
1) Read Codes
►2) Erase Codes
3) Deactivate Brake
4) Activate Brake
I
f you do not wish to proceed to erase the codes, then press
N button or use UP/DOWN button to select NO and then
VS8622_1.03_12/03/09
10