Sealey VS8622 - Manual (Page 26)

- Brake system venting has been completed.
- Set filling and bleeding unit pressureless.
- Leave filling and bleeding unit connected.
32) Press Y button to continue and wait until the “Operation Done!”
message shows:
........ Change Fluid .... .
Operation Done!
Press any key to con.
If the operation is not carried out successfully, an
“Operation Failed!” message shows. Repeat the process to
try again.
33) Press any key or wait a few seconds to return.
F. Inspect Brake Air
If brake system fails, only the front wheels are braked via a
separate hydraulic circuit without brake servo assistance. The
Inspect Brake Air is to ensure that no air is present in the
separate hydraulic circuit.
Important: DO NOT operate the pedal until you are prompted to
do; otherwise the service may not be completed.
1) Use UP/DOWN button to select Inspect Brake Air from Select
Function menu and press Y button to confirm.
........ Select Function .... .
6/7
5) Change Brake Fluid
► 6) Inspect Brake Air
7) ECU Information
2) View onscreen prompts and press Y button to continue.
VS8622_1.03_12/03/09
25