Sealey VS8622 - Manual (Page 21)

2) Wait a few minutes while the tool is deactivating. When the
brakes are deactivated successfully, following screen show:
......... Select Function ...... ...
3/7
1) Read Codes
2) Erase Codes
► 3) Deactivate Brake
4) Activate Brake
......... Deactivate Brake ...... ...
Deactivation Done!
Press any key to con.
If the tool fails to open the brake pads, a “Deactivation
Failed! Press any key to con.” message shows.
3) Press any key to return to previous menu.
D. Activate Brake
CAUTION: The SBC system must be activated after finishing the
maintenance/service work on the brakes.
Make sure the vehicle is properly blocked before and after
deactivation of the system.
1) To close the brake pads after finishing the maintenance/service
work on the brakes, use UP/DOWN button to select Activate
Brake from Select Function menu and press Y button.
........ Select Function ...... ...
4/7
1) Read Codes
2) Erase Codes
3) Deactivate Brake
►4) Activate Brake
VS8622_1.03_12/03/09
20