Sealey VS8622 - Manual (Page 20)

2) A warning message comes up asking for your confirmation.
............. Erase Codes ............ ...
Erase trouble codes!
Are you sure?
YES NO
............ Select Function ...... ...
2/7
1) Read Codes
►2) Erase Codes
3) Deactivate Brake
4) Activate Brake
I f you do not wish to proceed to erase the codes, press N
button or use UP/DOWN button to select NO and then
press Y button to exit. A “Command Cancelled!” message
shows up. Press any key or wait a few seconds to return.
3) Press Y button to erase.
If the codes are cleared successfully, an “Erase Done!”
message shows up.
If the codes are not cleared, then an “Erase Failure. Turn
Key on with Engine off!” message displays.
C. Deactivate Brake
WARNING: Deactivate the SBC system before carrying out any
maintenance/service work on the brakes such as the changing of
pads, discs and fluids!
Use proper tools to avoid the risk of body injuries to mechanics and
technicians and damage to the brake system.
Make sure the vehicle is properly blocked before and after
deactivation of the system.
1) To open the brake pads, use UP/DOWN button to select
Deactivate Brake from Select Function menu and press Y
button.
VS8622_1.03_12/03/09
19