Wi-fi specifications, Ethernet specifications, Security protocol – Epson WorkForce Pro WF-R8590 DTWF User Manual
Page 202
Interface
RJ-11 Phone Line, RJ-11 Telephone set connection
*
The specifications may differ by country or region.
Wi-Fi Specifications
Standards
IEEE802.11b/g/n
Frequency Range
2.4 GHz
Maximum Radio-Frequency
Power Transmitted
17.5 dBm (EIRP)
Coordination Modes
Infrastructure, Ad hoc
*1
, Wi-Fi Direct
*2 *3
Wireless Securities
WEP (64/128bit), WPA2-PSK (AES)
*4
, WPA2-Enterprise
*1
Not supported for IEEE 802.11n.
*2
Not supported for IEEE 802.11b.
*3
Simple AP mode is compatible with Ethernet connection. See the Network Guide for more details.
*4
Complies with WPA2 standards with support for WPA/WPA2 Personal.
Ethernet Specifications
Standards
IEEE802.3i (10BASE-T)
IEEE802.3u (100BASE-TX)
IEEE802.3ab (1000BASE-T)
*1
IEEE802.3az (Energy Efficient Ethernet)
*2
Communication Mode
Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full duplex, 100Mbps
Half duplex
Connector
RJ-45
*1
Use a category 5e or higher STP (Shielded twisted pair) cable to prevent risk of radio interference.
*2
The connected device should comply with IEEE802.3az standards.
Security Protocol
IEEE802.1X
*
IPsec/IP Filtering
SSL/TLS
HTTPS Server/Client
IPPS
SMTPS (STARTTLS, SSL/TLS)
SNMPv3
User's Guide
Appendix
202