Epson WorkForce Pro WF-R8590 DTWF User Manual
Page 223
c
Important:
❏ When storing or transporting the printer, avoid tilting it, placing it vertically, or turning it upside down;
otherwise ink may leak.
❏ Remove the ink supply units before you transport the printer; otherwise ink may leak during transporting. After
the transportation, re-install the ink supply units as soon as possible to prevent the print head drying out.
❏ Leave the maintenance box installed; otherwise ink may leak during transporting.
1.
Turn off the printer by pressing the
P
button.
2.
Make sure the power light turns off, and then unplug the power cord.
c
Important:
Unplug the power cord when the power light is off. Otherwise, the print head does not return to the home
position causing the ink to dry, and printing may become impossible.
3.
Disconnect all cables such as the power cord and USB cable.
4.
Remove all of the paper from the printer.
5.
Make sure there are no originals on the printer.
6.
Store the paper support and the output tray.
7.
Open the ink case.
8.
Push the handle on the ink supply unit.
The ink supply unit will pop out.
User's Guide
Appendix
223