Epson WorkForce Pro WF-R8590 DTWF - Manual (Page 55)

Placing Originals
Place originals on the scanner glass or the ADF. Use the scanner glass for originals that the ADF does not support.
You can scan multiple originals and both sides of the originals at the same time with the ADF.
Available Originals for the ADF
Available Paper Sizes A6 landscape/A5 to Ledger (Maximum 297×431.8 mm)
Paper Type Plain paper
Paper Thickness (Weight of Paper) 52 to 105 g/m2
Loading Capacity 50 sheets or 5 mm
To prevent paper jams, avoid placing the following originals in the ADF. For these types, use the scanner glass.
❏ Originals that are torn, folded, wrinkled, deteriorated, or curled
❏ Originals with binder holes
❏ Originals held together with tape, staples, paper clips etc.
❏ Originals that have stickers or labels stuck to them
❏ Originals that are cut irregularly or not right angled
❏ Originals that are bound
❏ OHPs, thermal transfer paper, or carbon backs
Placing Originals on the ADF
1. Align the edges of the originals.
2. Slide the ADF edge guides.
User's Guide
Placing Originals
55