Precision Digital PD941 - Manual (Page 12)

ConsoliDator Multi-Channel Controller Instruction Manual
12
INSTALLATION
Unpacking
Remove the instrument from its box. Inspect the packaging and contents for damage.
Report any damages to the carrier. If any part is missing or the controller malfunctions,
please contact your supplier or the factory for assistance.
Wall Mounting
(For PD980 & PD940 Models)

Obtain four #10 (M5) screws and nuts.
 Prepare four 1/4" (6 mm) holes through mounting surface spaced as shown.
 Allow at least 2” (5 mm) of free space on all sides so that the removable screw
terminals and DB9 connector may be accessed for wiring.
 Secure instrument to surface.
7.25" (184 mm)
8.00" (203 mm)
Dia. 0.25" (6 mm) 4 places
Figure 1. Wall Mount Dimensions (PD980 & PD940)