Solare Datensysteme Solar-Log - Manual (Page 119)

119
Editing Data
Restoring backup from USB section
This function restores a backup file with the name solarlog_backup.dat from the
USB stick connected directly to the device to the Solar-Log™.
Procedure
•
Click on RESTORE.
•
A configuration file is search for on the connected USB stick
First it looks in the main directory of the USB stick for solarlog_backup.dat, then it looks in the /
backup directory. And lastly it looks in the backup directory for solarlog_backup_YYMMDD.dat.
When it looks for the solarlog_config_YYMMDD.dat. file, it loads the latest file.
•
Start this search .
•
When a configuration file is found on the USB stick, click on Restore to import it.
•
The backup is being restored. Please wait a moment.
•
The Solar-Log™ reboots itself.
•
The configuration file was imported.
21�5 Reset
The Configuration | Data | Reset menu offers the following functions:
•
Reset the yield data
•
Reset the inverter configuration
•
Restore factory settings
Resetting the yield data section
In certain circumstances after an inverter detection, it may occur that incorrect or unusable data is dis-
played. In this case, the stored data can be deleted without having to reconfigure the Solar-Log com-
pletely.
Procedure
•
Click on RESET,
•
If you are sure that the data should be deleted, click on Continue. Otherwise click on Cancel.
•
The data is being deleted.
•
The Solar-Log™ reboots itself.