Solare Datensysteme Solar-Log - Manual (Page 190)

190
Direct Device Configurations (Solar-Log 1000)
Note
If there was an error in the PIN code confirmation (in the Repeat box), an error message
is displayed when exiting this dialog box and the PIN code remains unchanged.
Displaying the serial and license number
These show the Solar-Log™ serial number and license key if applicable. These values cannot be changed.
Delete data
Note
Before carrying out any of the following delete options, we recommend making a data
backup either at the PC, see “17.6 Backup” on page 87, or on a USB stick at the device
(see user manual), so that the data can be restored if necessary.

Selection options:
•
Initialize yield data
This button deletes all the yield data.
•
Initialize inverter configuration
This button deletes all inverter configuration data.
•
Restoring the factory settings is necessary if Solar-Log 1000 is to be used in another system or
if a faulty configuration is to be deleted. All settings made on the unit are lost, as well as all data
collected during run-time.
Procedure
•
Touch the desired delete option (see above list).
•
You are prompted for confirmation, with a warning that all data will be lost.
•
To delete all the data touch Yes - Save,
to cancel the delete operation, touch No - Cancel.
•
If the delete is confirmed, the device is restarted.