PLANET ICA-HM620 - Manual (Page 16)

Note
Rotate the dome camera until the two screw holes which on the dome camera and the
outdoor mount kit to be match.
Step 13
According to the practical local power voltage to adjust the power switch, and connect the power cord with
adapter and power outlet.
Note
Use only the power adapter shipped with the unit to ensure correct functionality
STEP 14.
Connecting the network cable with switch. The ICA-HM620 can be configured without external power if
connecting to IEEE 802.3at High Power over Ethernet (PoE plus) switch.
- 16 -