PLANET ICA-HM620 User Manual
Page 43
-
43
-
• Use fixed IP address
To setup static IP address, select <Use fixed IP address> and move the cursor to the
IP address blank and insert the new IP address, ex. 192.168.7.123; then go to the
Default gateway (explained later) blank and change the setting, ex. 192.168.7.254.
Press <Save> to confirm the new setting.
When using static IP address to login to the IP Camera, users can access it either
through “DeviceSearch” software (refer to User’s Manual) or input the IP address in
the URL bar and click on <Enter>.
• IP address
This is necessary for network identification.
• Subnet mask
It is used to determine if the destination is in the same subnet. The default value is
“255.255.255.0”.
• Default gateway
This is the gateway used to forward frames to destinations in different subnet. Invalid
gateway setting will fail the transmission to destinations in different subnet.
• Primary DNS
Primary DNS is the primary domain name server that translates hostnames into IP
addresses.
• Secondary DNS
Secondary DNS is a secondary domain name server that backups the primary DNS.
Use PPPoE
For the PPPoE users, enter the PPPoE Username and Password into the fields, and
click on the <Save> button to complete the setting.
Advanced
• Web Server port
The default web server port is 80. Once the port is changed, the user must be notified
the change for the connection to be successful. For instance, when the Administrator
changes the HTTP port of the IP Camera whose IP address is 192.168.0.100 from 80
to 8080, the user must type in the web browser “
http://192.168.0.100:8080
” instead of
“
• RTSP port