PLANET ICA-HM620 - Manual (Page 33)

4.3.1 Host Name and System Time Setting
Press the first category: <System> in the left column; the page is shown as below.
Host Name
The name is for camera identification. If Motion Detection function is enabled and is set to send alarm
message by Mail/FTP, the host name entered here will display in the alarm message.
Time Zone
Select the time zone you are in from the drop-down menu.
Enable Daylight Saving Time
To enable DST, please check the item and then specify time offset and DST duration. The format for
time offset is [hh:mm:ss]; for instance, if the amount of time offset is one hour, please enter “01:00:00”
into the field.
Sync with Computer Time
Select the item, and video date and time display will synchronize with the PC’s.
Manual
The Administrator can set video date, time and day manually. Entry format should be identical with that
- 33 -