PLANET ICA-HM620 - Manual (Page 54)

- 54 -
roperty can be programmed in this section as shown below. The specific alarm pin’s p
larm Switch A
or can enable or disable the alarm function.
Alarm Type
The Administrat
m type, “Normal close” or “Normal open,” that corresponds with the alarm application.
Triggered Action (Multi-option)
Select an alar
m actions that will take at an alarm occurrence. All options are listed
e Alarm Output 1/2
arm relay output.
• Send Alarm Message by FTP/E-Mail
send an alarm message by FTP and/or E-Mail when an
The Administrator can specify alar
as follows:
• Enabl
Select the item to enable al
The Administrator can select whether to
alarm is triggered.