ProSoft Technology MVI46-MCM User Manual
Page 78
Advertising
![background image](/files/866156/content/doc078.png)
Reference MVI46-MCM
♦ SLC Platform
User Manual
Modbus Communication Module
Page 78 of 108
ProSoft Technology, Inc.
March 29, 2011
RS-232: Null Modem Connection (No Hardware Handshaking)
This type of connection can be used to connect the module to a computer or field
device communication port.
Note: For most null modem connections where hardware handshaking is not required, the Use
CTS Line parameter should be set to N
and no jumper will be required between Pins 7 (RTS) and 8
(CTS) on the connector. If the port is configured with the Use CTS Line set to Y, then a jumper is
required between the RTS and the CTS lines on the port connection.
Advertising