P.122 – Canon EOS 80D User Manual

Page 122

Advertising
background image

S

Selecting the AF Area and AF PointN

122

You can manually select the AF point or zone.

1

Press the <S> or <B> button

(

9

).

The AF points will be displayed in the
viewfinder.

In the Zone AF mode or Large Zone
AF mode, the selected zone will be
displayed.

2

Select an AF point.

The AF point selection will change in
the direction you tilt <9>. If you
press <0>, the center AF point (or
center zone) will be selected.

You can also select an AF point by
shifting horizontally with the <6>
dial or vertically with the <5> dial.

In the Zone AF mode, turning the
<6> or <5> dial will change the
zone in a looping sequence.

Selecting the AF Point Manually

<6>

<5>

When you hold down the <Q> button and turn the <6> dial, you can
select an AF point by shifting vertically.

When [8C.Fn II-11: Initial AFpt, o AI Servo AF] is set to [1: Initial
o

AF pt selected] (p.422), you can use this method to manually select

the AI Servo’s AF initial position.

When you press the <S> or <B> button, the LCD panel displays the
following:
• Zone AF, Large Zone AF, and 45-point automatic selection AF: M AF
• 1 pt AF: SEL N (Center)/SEL AF (Off-center)

Advertising