Canon EOS 80D - Manual (Page 237)

237
3 Setting the FlashN
When you use the built-in flash or an
external, EX-series Speedlite compatible
with flash function settings, you can
press the <D> button to directly display
the [Built-in flash settings] or [External
flash func. setting] screen without first
displaying the menu screen.
 With built-in flash
Press the <D> button twice.
 Press the button to raise the built-in
flash.
 Press the button again to display the
[Built-in flash settings] screen.
 If [Flash firing] is set to [Disable], the
[z1: Flash control] screen will
appear (p.235).
 With external Speedlite
Press the <D> button.
 With the external Speedlite turned on,
press the <D> button to display the
[External flash func. setting]
screen.
Displaying the Flash Function Setting Screen Directly
When you press the <D> button to display the flash function setting screen,
you cannot set [Flash firing], [E-TTL II meter.], [Flash sync. speed in Av
mode], or [External flash C.Fn setting]. Set these functions with [z1:
Flash control] instead.