Canon EOS 80D User Manual

Page 272

Advertising
background image

3

Menu Function Settings

272

z

6 N

Silent LV shootingN
• Mode 1

When shooting, you can suppress the mechanical sound more
than with viewfinder shooting. Continuous shooting is also
possible. If <o> is set, you can shoot at a maximum continuous
shooting speed of approx. 7.0 fps.

• Mode 2

When the shutter button is pressed completely, only one shot will
be taken. While you are holding down the shutter button, the
camera operation will be suspended. Then when you return to the
shutter button’s halfway position, the camera operation will resume.
The shooting noise is thereby minimized. Even if continuous
shooting is set, only a single shot will be taken.

• Disable

Be sure to set it to [Disable] if you use a TS-E lens (other than
those listed in ) for shifting or tilting the lens or if you use an
Extension Tube. If [Mode 1] or [Mode 2] is set, the standard
exposure may not be obtained, or an irregular exposure may result.

Between [Mode 1] and [Disable], the internal operation alone is different
between the single drive mode and the first shot during continuous
shooting. Continuous shooting with [Mode 1] will have the same
mechanical sound as the [Disable] setting for the second and
subsequent shots.

When shooting with flash, the [Disable] setting will be applied regardless
of the [Silent LV shoot.] setting. (You cannot suppress the mechanical
sound when shooting.)

When using a non-Canon flash unit, set it to [Disable]. The flash will not
fire if it is set to [Mode 1] or [Mode 2].

If [Mode 2] is set and you use a Remote Controller (p.221), the operation
will be the same as with [Mode 1].

Advertising