Canon EOS 80D - Manual (Page 326)

326
z 4
When the Live View shooting/Movie
shooting switch is set to <k>, the
movie shooting menu options will appear
under the [z4] and [z5] tabs (the
[z2] and [z3] tabs in Basic Zone
modes).
 Movie Servo AF
With this function enabled, the camera focuses on the subject
continuously during movie shooting. The default setting is [Enable].
When [Enable] is set:
• The camera focuses on the subject continuously even when you
are not pressing the shutter button halfway.
• If you want to keep the focus at a specific point, or if you do not
want the lens mechanical sound to be recorded, you can
temporarily stop Movie Servo AF as follows. When you stop Movie
Servo AF, the AF point will turn gray. When you perform the same
steps below, Movie Servo AF will resume.
• Tap the [Z] icon on the lower left of the screen.
• Press the <D> button.
• Under [8C.Fn III-4: Custom controls], if a button is assigned
with [AF stop], you can pause the Movie Servo AF while holding
down that button. When you let go of the button, Movie Servo AF
will resume.
• While Movie Servo AF is paused, if you return to movie shooting
after operations such as pressing the <M> or <x> button, or
changing the AF method, Movie Servo AF will resume.
When [Disable] is set:
• Press the shutter button halfway or press the <p> button to
focus.
3
Menu Function Settings