Canon EOS 80D User Manual

Page 454

Advertising
background image

3

Checking the Battery Information

454

It is convenient to label each registered Battery Pack LP-E6N/LP-E6
with their serial numbers, using commercially-available labels.

1

Write the serial number on a
label.

Write the serial number displayed on
the battery history screen on a label
approx. 25 mm x 15 mm / 1.0 in. x 0.6
in. in size.

2

Remove the battery and affix the
label.

Set the power switch to <2>.

Open the battery compartment cover
and remove the battery.

Affix the label as shown in the
illustration (on the side with no
electrical contacts).

Repeat this procedure for all of your
batteries so you can easily see the
serial number.

Labeling the Serial Number on the Battery

Serial number

7c400300

Do not affix the label on any part other than as shown in the illustration in
step 2. Otherwise, the misplaced label may make it difficult to insert the
battery or impossible to turn on the camera.

If you use Battery Grip BG-E14 (sold separately), the label may peel off
as you repeatedly insert and remove the battery. If it peels off, affix a new
label.

Advertising