Canon EOS 80D - Manual (Page 324)

N Shooting Time-lapse Movies
324
 If the time it takes to record to the card exceeds the interval between
shots due to the shooting functions set or card performance, shooting
with the set interval may not be performed.
 The captured images are not recorded as still photos. Even if you cancel
the time-lapse movie shooting after only one shot is taken, it will be
recorded as a movie file.
 If the card does not have enough free space to record the set number of
shots, [Playback time] will be displayed in red. Although the camera can
continue shooting, the shooting will stop when the card becomes full.
 If you connect the camera to a computer with the interface cable
provided with the camera and use EOS Utility (EOS software), set [z5:
Time-lapse movie] to [Disable]. If it is set to [Enable], the camera
cannot communicate with the computer.
 During time-lapse movie shooting, the lens’s Image Stabilizer will not
operate.
 If the power switch is set to <2> or the Live View shooting/Movie
shooting switch is operated, time-lapse movie shooting will be terminated
and the setting is switched to [Disable].
 Even if a flash is used, it will not fire.
 Shooting-ready state of the time-lapse movie is canceled and the setting
is switched to [Disable] with any of the following operations:
• Selecting [z3: Dust Delete Data], [53: Sensor cleaning], [54:
Clear all camera settings], or [54: zfirmware ver.].
• Selecting <w> or <x> shooting modes.
 When time-lapse movie shooting ends, the settings are cleared
automatically, and the camera returns to normal movie shooting. Note
that if you have set the shutter speed slower than 1/60 sec. for time-
lapse movie shooting and the settings are automatically cleared, the
shutter speed may be automatically changed to a speed within the
settable range for normal movie shooting.
 If you start time-lapse movie shooting while the white <s> (p.343) is
displayed, the image quality of the time-lapse movie may deteriorate.