Canon EOS 80D - Manual (Page 459)

459
H Using Eye-Fi Cards
Cautions for Using Eye-Fi Cards
 If [Wi-Fi/NFC] under [51: Wireless communication settings] is set to
[Enable], image transfer with an Eye-Fi card is not possible.
 If “J” is displayed, an error occurred while retrieving the card
information. Turn the camera’s power switch off and on again.
 Even if [Eye-Fi trans.] is set to [Disable], it may still transmit a signal. In
hospitals, airports, and other places where wireless transmissions are
prohibited, remove the Eye-Fi card from the camera.
 If the image transfer does not function, check the Eye-Fi card and
computer settings. For details, refer to the card’s instruction manual.
 Depending on the wireless LAN’s connection conditions, the image
transfer may take longer or it may be interrupted.
 The Eye-Fi card may become hot as it transmits.
 The camera’s battery power will be consumed faster.
 During the image transfer, auto power off will not take effect.
 If you insert a wireless LAN card other than an Eye-Fi card, [Eye-Fi
settings] will not appear. Also, the transmission status icon <H> will not
appear.