HP ENVY 6055e All-in-One Printer All-in-One Printer with 3 Months Free Ink Through HP+ - Manual (Page 21)

Sleep mode
Power usage is reduced while in Sleep mode. After initial setup of printer, the printer will enter Sleep mode
after five minutes of inactivity. Use the HP Smart app to change the period of inactivity before the printer
sleeps by selecting Advanced Settings. You can also change this setting using the printer’s embedded web
server by completing the following steps.
To change the time to Sleep mode
1. Open the embedded web server (EWS). For more information, see Open the embedded web server
on page 36 .
2. Click the Settings tab.
3. In the Power Management section, click Energy Save Mode, and select the desired option.
NOTE: If prompted for a password, enter the PIN from the label on your printer. It might be near the
cartridge access area inside the printer or on the back, side, or bottom of the printer.
4. Click Apply.
ENWW Sleep mode 15