HP MSL6000 Series - Manual (Page 67)

MSL6000 series tape library user guide 67
Network Options
Selecting this option lets you view the settings defined from the Network option in the Edit
Options area (see Figure 50 ). Table 7 on page 68 lists and describes the available options.
NOTE: There are no firmware default settings for networks. Contact your network administrator for
specific information on connecting the library to your network.
Figure 50 Default view network options screen
NOTE: The IP Address, IP Mask, IP Gateway, and DNS Server become available after selecting
User Specified IP Address from the Network screen under Edit Options.
Data Transfer Speed Lets you set the robot or library SCSI data transfer rate to
Synchronous, 10 MB/sec, Synchronous, 5 MB/sec, or
Asynchronous Only. The default is Synchronous, 10
MB/sec.
Report Element Type The default is Disabled.
Fast Terminate
Sequence
The default is Disabled.
Table 6 View SCSI Options (continued)
Option Description