Furuno GP-150-DUAL - Manual (Page 19)

2. DISPLAY AND TRACK
2-3
When plotting is stopped
"Stopping track plot" appears at the center of
the display for about three seconds and "
H
"
appears at the left side of the display. ("
H
"
does not appear on the Navigation and Data
displays.)
234
°
34 ° 23.456´ N 135 ° 45.678´ E
BRG
345
°
RNG
123
12.3
SOG
nm
kt
COG
H
Hold icon
(appears while recording
of track is stopped)
D3D 100m
SAFE
Recording
is stopped.
This portion of track
does not appear on
the display
Own ship
Recording of
track started
Ship’s track
while recording is
stopped
Recording of track
turned off
Figure 2-3 Track not plotted or
recorded when plotting is stopped
2.7 Erasing Track
The track stored in the memory and
displayed on the screen can be erased.
Note: Track cannot be restored once erased.
Be absolutely sure you want to erase
track.
1) Press the
MENU ESC key to show the
MAIN MENU.
MAIN MENU
1. DISPLAY SETUP
2. TRACK/MARK SETUP
3. ERASE TRACK/MARK
4. ALARM SETTINGS
5. MANUAL CALCULATION
6.
7. GPS MONITOR
8. SELF TESTS
9. SYSTEM SETTINGS 1. DISPLAY SETUP
ENT: Enter MENU: Escape
Figure 2-4 MAIN menu
2) Press
3 to select ERASE TRACK/MARK.
ERASE TRACK/MARK
Erase Mark No
Erase Track
No Yes
Yes
Track Pts. Used:
Mark Pts. Used: 123/1000 Pt
345/1000 Pt
: Select
MENU: Escape
Figure 2-5 ERASE TRACK/MARK menu
3) Press to select Erase Track.
4) Press to select Yes. The message
shown in Figure 2-6 appears.