Furuno GP-150-DUAL - Manual (Page 45)

6. SETTING UP VARIOUS DISPLAYS
6-3
Entering waypoints using LOPs
1) Press WPT RTE and 4.
2) Press to display LOPs.
WAYPOINT LIST (LOP, LC)
001 36365.2 59102.3
MARINE POINT AUG12’ 03 12 : 35U
001
002 36512.3 59134.5
___ A POINT AUG13’ 03 13 : 45U
MENU : Escape
: L/L LOP : Edit
ENT : Enter
003 _ _ _ _ _ , _ _ _ _ _ _ , _
___ _ _ _ _ _ _ _ _ _ _ _ _
004 _ _ _ _ _ , _ _ _ _ _ _ , _
___ _ _ _ _ _ _ _ _ _ _ _ _
Figure 6-4 LOP display on the waypoint list
3) Press or to select waypoint
number.
4) Press or . Your display should look
like one of the displays in Figure 6-5.
LC8930 : 30 50
3 8931.2 58654.3
(34
°
12.345’ N 130
°
23.456’ E)
Mark :
Cmnt : MARINE POINT
Edit=Waypoint : 001
ENT : Enter
: Cursor
MENU : Escape
3
: Column
DE : 32 (9C) RED GREEN
1 A:12.23 2H:24.35
(34
°
12.345’ N 130
°
23.456’ E)
Mark :
Cmnt : MARINE POINT
Edit=Waypoint : 001
ENT : Enter
: Cursor
MENU : Escape
1
: Column
ABCDEFGHIJ fi 1, 2 ~ 9, 0
Loran C LOP input screen
Decca LOP input screen
Figure 6-5 LOP input screens
5) Key in LOP1 and LOP2, to enable
calculation.
6) Press to calculate LOPs. "Calculating"
appears between parentheses during the
calculation. Actual LOPs replace
"Calculating" upon completion of the
calculation.
If the conversion fails, the message "Failed in
Conversion" appears for three seconds.
Press the
CLEAR key and reenter the right
LOP1 and LOP2.
7) Press or to select mark.
8) Press the
NU/CU ENT key.
9) Enter comment, if desired.
10) Press the
NU/CU ENT key twice.
The waypoint list appears.