Furuno GP-150-DUAL - Manual (Page 71)

10-3
Flush mounting type S
An optional flush mount kit type S is required. (Name: Flush Mount Kit S, Type:
OP20-24, Code No.: 004-393-000)
Name Type Code No. Qty
Wing bolt M4X30 YBSC2 000-804-799 4
Hex. bolt M6X12 SUS304 000-862-127 2
Wing nut M4 YBCS2 000-863-306 4
Spring washer M6 SUS304 000-864-260 2
Flush mount metal 20-013-1111 100-234-230 2
1. Prepare a cutout in the mounting location whose dimensions are 242 (W) X
152 (H) mm.
2. Insert the unit to the cutout.
3. Attach two flush mount metals to the unit with two hex bolts (M6X12) and two
spring washers.
4. Screw four wing bolts to wing nut.
5. Fasten the unit with four wing bolts assembled at step 4, and then tighten
nuts.