Furuno GP-150-DUAL - Manual (Page 56)

8. MENU SETTINGS
8-6
Enlarging characters
The size of the indications of position or
user-defined display areas can be enlarged
on the Data display.
1) On the Data display, with no enlarged
characters, press the CURSOR ON/OFF
key to turn on the zoom icon.
2) Operate the cursor keys to select data to
enlarge in the window.
3) Press the ZOOM IN key.
To switch character size from enlarged to
normal, press the
ZOOM OUT key at step 3.
JAN 12, 2006 23:59'59" U
N12 °
E123 °
POSITION 23.456'
23.456'
JAN 12, 2006 23:59'59" U
12 ° 23.456' N
123 ° 23.456' E
POSITION
RNG
31.23
nm
SOG
12.3
kt
BRG
223.4 °
COG
123.4 °
TO : 001
MARINE
POINT1
NEXT
: 002
MARINE
POINT2
ZOOM
IN
ZOOM
OUT
Position
User-defined
display window
WGS84
WGS84
D3D 100m
SAFE
D3D 100m
SAFE
Zoom icon
Figure 8-7 How to enlarge
indications on the data display
8.4 Outputting Data
Besides its fundamental function of
displaying position, the GP-150-DUAL can
also receive data and output data to external
equipment, through an interface unit. Before
outputting data to external equipment, first
determine what data the external equipment
requires. Output only necessary data to
ensure data will be output correctly.
All data transmitted by marine electronics
equipment are prefixed with a two-character
code called a talker. The same talker must
be shared by the transmitting and receiving
equipment to transmit and receive data
successfully. The GP-150-DUAL transmits
data using the GP (GPS talker), LC (Loran)
or DE (Decca) talker.
DATA 1 output setting
1) Press MENU ESC, 9 and 3. The DATA 1,
3 OUTPUT SETUP menu appears.
Talker ID GP LC DE
Output Data (00-90 sec) 91%
1. AAM:00 APA:00 APB:04 BOD:00
2. BWR:00 BWW:00 GGA:00 GLL:00
3. RMB:01 RMC:01 VTG:01 WCV:00
4. WNR:00 WPL:00 XTE:00
ZDA:01
5. GNS:00 GBS:00 Rnn:00 RTE:00
DATA3. Log Pulse 400ppm
DATA 1, 3 OUTPUT SETUP
MENU : Escape ENT : Enter
Settings shown here are default settings.
This line appears only when LOG is
selected by internal jumper wires.
Data Fmt. V1.5 V2.0 IEC
200ppm
Figure 8-8 DATA 1 OUTPUT
SETUP menu