Furuno GP-150-DUAL - Manual (Page 79)

10. INSTALLATION
10-11
TLL: Target latitude and longitude
$--TLL, 00, 3445.678, N, 13521.234, E, abcd,
121530, T
a b c d d f g
h
R*A5<CR><LF>
a: Target number … not used
b, c: Latitude
d, e: Longitude
f: Target name … not used
g: UTC … not used
h: Target status … not used
i: Reference target … not used
j: Checksum
FURUNO proprietary sentences
AGFPA: Autopilot information from FURUNO autopilot
Port Input Output
DATA1 NMEA
0183
Ver. 1.5/2.0
AGFPA, DBT, DPT,
MTW, TTL
IEC 61162-1/NMEA 0183 Ver.
1.5/2.0
AAM, APA, APB, BOD, BWC,
BWR, BWW, GGA, GLL, GNS,
RMB, RMC, VTG, WCV< WNC,
WNR, WPL, XTE, ZDA, GBS,
Rnn, RTE
LOG PULSE
DATA3 External MOB
Same as for DATA1.
General data
DATA4 DGPS or general
data (selected
through menu)
IEC 61162-1/NMEA 0183 Ver.
1.5/2.0
AAM, APA, APB, BOD, BWC,
BWR, BWW, GGA, GLL, GNS,
RMB, RMC, VTG, WCV< WNC,
WNR, WPL, XTE, ZDA, GBS,
Rnn, RTE
Note: BWC, BWR, GGA, GLL, RMB, RMC or WPL is required to output DTM.