Furuno GP-150-DUAL - Manual (Page 39)

5. SETTING DESTINATION
5-5
Skipping route waypoints
You may skip route waypoints by displaying
"DI" (DIsable) next to the route waypoint in
the route list. Using Figure 5-14 as an
example, your ship is currently heading
toward waypoint 04 but is to switch course
and head to waypoint 03. In this case you
would want to skip waypoint 04.
Waypoint 03
Waypoint 05
Port A
Port B
Waypoint 01
Waypoint 02
Waypoint 04
Waypoint 06
New course
Figure 5-14
1) Press
WPT RTE and 5 to display the
route list. Press the cursor keys to select
route.
ROUTE :01
ENT:Enter MENU:Escape
(In Use, REVERSE)
skip Distance TTG
001
003 36
°
12.345’ N 135
°
23.456’ E
A POINT AUG 10’ 03 13:45U
: RTE WPT CLEAR: Delete
Trial Speed Auto Man (012.0kt)
01 0 04 EN
02 0 03 EN 345.67nm 2D 12H 34M
34
°
12.345’ N 130
°
23.456’ E
MARINE POINT AUG 10’ 03 12:35U
004
01 0
"EN" indicates waypoint
is enabled. Display "DI"
to skip waypoint.
nm D M H
Figure 5-15 Route list
2) Press or to select route waypoint
to skip.
3) Press or to shift the cursor to the
right of the waypoint number.
4) Press to change "EN"(ENable) to
"DI"(DIsable).
5) Press the NU/CU ENT key.
To reselect the waypoint, select it on the
route list and press
to change "DI" to
"EN".
Route waypoints are mutually skipped when
the navigators are sharing data.
5.2 Cancelling Destination
Destination is cancelled at both GPS
navigators when they are sharing data.
1) Press the
GOTO key.
2) Press 5 to select Cancel. The message
shown in Figure 5-16 appears.
Release GOTO ?
ENT:Yes MENU:No
Figure 5-16
3) Press the
NU/CU ENT key.
Note: If you are using the simple route, it will
be erased when the destination is
canceled.