Multi-Tech Systems MULTIVOIP MVP-410ST/810ST - Manual (Page 173)

MultiVOIP User Guide Technical Configuration (T1/E1)
173
“Regional Parameter” Definitions
Field Name Values Description
Frequency 1 frequency in
Hertz Lower frequency of pair.
Frequency 2 frequency in
Hertz Higher frequency of pair.
Gain 1 gain in dB
+3dB to –31dB
and “mute”
setting Amplification factor of lower
frequency of pair.
This figure describes amplification
that the MultiVOIP
applies to outbound tones entering
the MultiVOIP at
the T1 port. Default: -16dB
Gain 2 gain in dB
+3dB to –31dB
and “mute”
setting Amplification factor of higher
frequency of pair.
This figure describes amplification
that the MultiVOIP
applies to outbound tones entering
the MultiVOIP at
the T1 port. Default: -16dB