Multi-Tech Systems MULTIVOIP MVP-410ST/810ST - Manual (Page 237)

MultiVOIP User Guide Technical Configuration (Analog/BRI)
237
Voice/Fax Parameter Definitions (cont’d) )
Field Name Values Description
Dynamic Jitter
Dynamic
Jitter Buffer Dynamic Jitter defines a minimum
and a maximum jitter value for
voice communications. When
receiving voice packets from a
remote
MultiVOIP , varying delays
between packets may occur due to
network traffic problems. This is
called Jitter. To compensate, the
MultiVOIP uses a Dynamic Jitter
Buffer. The Jitter Buffer enables the
MultiVOIP to wait for delayed
voice packets by automatically
adjusting the length of the Jitter
Buffer between configurable
minimum and maximum values.
An Optimization Factor adjustment
controls how quickly the length of
the Jitter Buffer is increased when
jitter increases on the network. The
length of the jitter buffer directly
effects the voice delay between
MultiVOIP gateways.
Minimum
Jitter Value 60 to 400
ms The minimum dynamic jitter buffer
of 60 milliseconds is the minimum
delay that would be acceptable over
a low jitter network.
Default = 150 msec