Multi-Tech Systems MULTIVOIP MVP-410ST/810ST - Manual (Page 325)

MultiVOIP User Guide T1 PhoneBook Configuration
325
Add/Edit Outbound Phone Book: Field Definitions
(cont’d)
Field Name Values Description
Destination
Pattern prefixes,
area codes,
exchanges,
line
numbers,
extensions Defines the beginning of
dialing sequences for calls
that will be connected to
another VOIP in the system.
Numbers beginning with
these sequences are diverted
from the PTSN and carried
on Internet or other IP
network.
Total Digits as needed This field currently disabled.
number of digits the phone
user must dial to reach
specified destination.
Remove Prefix dialed digits portion of dialed number to
be removed before
completing call to destination
Add Prefix dialed digits digits to be added before
completing call to destination
IP Address n.n.n.n
for
n = 0-255 the IP address to which the
call will be directed if it
begins with the destination
pattern given
Description alpha-
numeric
Describes the facility or
geographical location at
which the call will be
completed.
Protocol Type SIP or H.323
or SPP
Indicates protocol to be used in
outbound transmission. Single
Port Protocol (SPP) is a non-
standard protocol designed by
Multi-Tech.