Multi-Tech Systems MULTIVOIP MVP-410ST/810ST - Manual (Page 298)

Technical Configuration (Analog/BRI) MultiVOIP User Guide
298
Supplementary Services Definitions (cont’d)
Field Name Values Description
Busy Party,
Allowed
Name Type
(CNI) If the ‘home’ voip unit is receiving a
call directed toward an already
engaged channel or phone station and
Busy Party
is selected, then the
identifier (from the Caller Id field)
will tell the originating remote voip
unit that the channel or called party is
busy.
This field is applicable only when the
‘home’ voip unit is receiving the call.
Example
. Suppose a voip system has
offices in both Denver and Omaha. In
the Omaha voip unit (the ‘home’ voip
unit in this example), Call Name
Identification
has been enabled, Busy
Party has been enabled as an Allowed
Name Type , and “Omaha Sales Office
Voipchannel 2” has been entered in
the Caller Id field of the
Supplementary Services
screen.
When channel 2 of the Omaha voip is
busy but still receives a call attempt
from any other voip phone station
(for example, the Denver office), the
message “Busy Party - Omaha Sales
Office Voipchannel 2” will be sent
back and will appear in the Caller Id
field of the Statistics – Call Progress
screen of the Denver voip. This
confirms to the Denver voip that the
channel or phone station is busy in
Omaha.