Multi-Tech Systems MULTIVOIP MVP-410ST/810ST - Manual (Page 38)

Overview MultiVOIP User Guide
38
Supplementary Telephony Services . The H.450 standard (an addition
to H.323) brings to voip telephony more of the premium features found
in PSTN and PBX telephony. MultiVOIP units offer five of these H.450
features: Call Transfer, Call Hold, Call Waiting, Call Name
Identification (not the same as Caller ID), and Call Forwarding. (The
first four features are found in the “Supplementary Services” window;
the fifth, Call Forwarding, appears in the Add/Edit Inbound
phonebook screen.) Note that the first three features are closely related.
All of these H.450 features are supported for H.323 operation only; they
are not supported for SIP or SPP.
ISDN BRI MultiVOIP Front Panel LEDs
LED Types . The MultiVOIPs have two types of LEDs on their front
panels:
(1) general operation LED indicators (for power, booting, and
ethernet functions), and
(2) channel operation LED indicators that describe the data traffic
and performance in each VOIP data channel.
Active LEDs. On the MVP810ST, there are four sets of ISDN-operation
LEDs. On the MVP410ST, there are two sets of ISDN-operation LEDs.
Each set contains one “D” LED and two sets of channel operation LEDs
(XMT and RCV).
Figure 1-13. MVP-410ST/810ST LEDs