Multi-Tech Systems MULTIVOIP MVP-410ST/810ST - Manual (Page 444)

Operation and Maintenance MultiVOIP User Guide
444
ISDN BRI Statistics: Field Definitions
Field
Name Values Description
Select BRI
Interface ISDNn
For n=1-2 (410ST)
For n-1-4 (810ST)
In this field, you can choose the ISDN
port for which you want to view the
status. The 410ST has two ISDN –BRI
ports (or “interfaces”); the 810ST has
four ISDN-BRI ports (or “interfaces”).
Each interface has two channels.
Layer 1 Interface
Status inactive (F1),
sensing (F2),
deactivated (F3),
awaiting signal (F4),
identifying input (F5),
synchronized (F6),
activated (F7),
lost framing (F8),
deactive (G1),
pending
activation (G2),
active (G3),
pending
deactivation (G4)
Shows the current Layer 1 status of the
ISDN connection. Each status
description (inactive, sensing, etc.)
corresponds to a particular “state” label
(F1-F8 and G1-G4).
State F1-F8 (for Terminal
mode ports),
G1-G4 (for Network
mode ports)
Shows the I.430 state name for Layer 1.
An “F” state name indicates this port is
in Terminal mode (F1-F8), as set in the
ISDN BRI Parameters screen.
A “G” state name indicates that this
port is in Network mode (G1-G4), as set
in the
ISDN BRI Parameters screen.
Loss Of
Framing integer Shows the number of lost-framing
events on the ISDN physical layer.
Loss of
Sync integer Shows the number of lost-
synchronization events on the ISDN
physical layer.