Multi-Tech Systems MULTIVOIP MVP-410ST/810ST - Manual (Page 409)

MultiVOIP User Guide Operation & Maintenance
409
Phonebooks for Series II analog MultiVOIP units (MVP130,
MVP130FXS, MVP210, MVP410, and MVP810) and BRI MultiVOIP
units (MVP410ST/810ST) are, in principle, configured the same as
phonebooks for digital MultiVOIP products that would operate in the
same environment (under either North American or European
telephony standards, T1 or E1).
Therefore, if you are operating an analog MultiVOIP unit in a North
American telephony environment, you will find useful phonebook
instructions and examples in Chapter 7: T1 Phonebook Configuration. If
you are operating an analog MultiVOIP unit in a European telephony
environment, you will find useful phonebook instructions and
examples in Chapter 8: E1 Phonebook Configuration.
Most of the examples in Chapters 7 and 8 describe systems containing
both digital and analog MultiVOIP units.
You will also find useful information in Chapter 2: Quick Start Guide.
See especially these sections:
Phonebook Starter Configuration
Phonebook Tips
Phonebook Example (One Common Situation)
Chapter 2 also contains a “Phonebook Worksheet” section. You may
want to print out several worksheet copies. Paper copies can be very
helpful in comparing phonebooks at multiple sites at a glance. This will
assist you in making the phonebooks clear and consistent and will
reduce ‘surfing’ between screens on the configuration program.