Multi-Tech Systems MULTIVOIP MVP-410ST/810ST - Manual (Page 274)

Technical Configuration (Analog/BRI) MultiVOIP User Guide
274
The Regional Parameters fields are described in the table below.
“Regional Parameter” Definitions
Field Name Values Description
Country/
Region USA, Japan, UK,
Custom Name of a country or region that
uses a certain set of tone pairs for
dial tone, ring tone, busy tone ,
unobtainable tone (fast busy tone),
survivability tone (tone heard
briefly, 2 seconds, after going
offhook denoting survivable mode
of VOIP unit), re-order tone (a tone
pattern indicating the need for the
user to hang up the phone), and
intercept tone (a tone that warns an
a party that has gone off hook but
has not begun dialing, within a
prescribed time, that an automatic
emergency or attendant number
will be called; the automatic call
can be used to direct an attendant’s
attention to a disabled or distressed
caller, allowing an appropriate
response to be made).
In some cases, the tone-pair scheme
denoted by a country name may
also be used outside of that
country. The “Custom” option
(button) assures that any tone-
pairing scheme worldwide can be
accommodated.
Note
: Intercept tone is applicable
only when the FXS telephony
interface has been chosen in the
Interface screen and when the
AutoCall / OffHook Alert field is set
to OffHook Alert in the Voice/Fax
Parameters screen. The time
allowed for dialing before the
automatic calling process begins is
set in the Offhook Alert Timer field
of the Voice/Fax Parameters
screen.