Multi-Tech Systems MULTIVOIP MVP-410ST/810ST - Manual (Page 99)

MultiVOIP User Guide Mechanical Installation & Cabling
99
8. Ensure that the unit is properly connected to earth ground by
verifying that it is reliably grounded when mounted within a rack.
This can be accomplished by connecting a grounding wire between
the chassis grounding screw (see Figure 3-13) and a metallic object
that will provide an electrical ground.
9. Turn on power to the MultiVOIP by placing the ON/OFF switch on
the back panel to the ON position. Wait for the Boot LED on the
MultiVOIP to go off before proceeding. This may take a few minutes.
Proceed to Chapter 4 to load the MultiVOIP software.