Multi-Tech Systems MULTIVOIP MVP-410ST/810ST - Manual (Page 450)

Operation and Maintenance MultiVOIP User Guide
450
MultiVOIP Program Menu (cont’d)
Menu Selection Description
Download Factory Defaults Select this to return the configuration
parameters to the original factory
values.
Download Firmware Select this to download new versions
of firmware as enhancements become
available.
Download IFM Firmware Select this to download new versions
of IFM firmware as enhancements
become available. The Interface
Module (IFM) is the telephony
interface for analog MultiVOIP units
(MVP130, MVP130FXS, MVP210,
MVP410, MVP810). There is one IFM
for each channel of the MultiVOIP
unit. For each channel, the IFM
handles the analog signals to and from
the attached telephone, PBX or CO
line.
Download User Defaults To be used after a full set of parameter
values, values specified by the user,
have been saved (using Save Setup).
This command loads the saved user
defaults into the MultiVOIP.
Set Password Select this to create a password for
access to the MultiVOIP software
programs (Program group commands,
Windows GUI, web browser GUI, &
FTP server). Only the FTP Server
function requires a password for access.
The FTP Server function also requires
that a username be established along
with the password.
Uninstall Select this to uninstall the MultiVOIP
software (most, but not all components
are removed from computer when this
command is invoked).
Upgrade Software Loads firmware (including H.323
stack) and factory default settings from
the controller PC to the MultiVOIP
unit.