Multi-Tech Systems MULTIVOIP MVP-410ST/810ST - Manual (Page 366)

E1 Phonebook Configuration MultiVOIP User Guide
366
Then fill in the IP address, signaling port, and other parameters, as
needed. (The parameters needed for each protocol are different.)
The table below describes all fields in the general PhoneBook
Configuration
screen.
PhoneBook Configuration Parameter Definitions
Field Name Values Description
Gateway
Name Y/N This field allows you to specify
a name for this MultiVOIP.
When placing a call, this name
is sent to the remote
MultiVOIP for display in Call
Progress listings, Logs, etc.
H.323 Parameters
Use Fast Start Y/N Enables the H.323 Fast Start
procedure. May need to be
enabled/disabled for
compatibility with third-party
VOIP gateways.
Signaling Port port
number Default: 1720 (H.323)
GateKeeper RAS Parameters
Gatekeeper /
IP Address n.n.n.n,
for n =
0 - 255
IP address of the GateKeeper.
Signaling Port 1 - 64000 Well-known port number for
GateKeepers.
Must match port number of
GateKeeper, 1719.
Gatekeeper
Name alpha-
numeric
string Optional. The name of the
GateKeeper with which this
MultiVOIP is trying to register.