Multi-Tech Systems MULTIVOIP MVP-410ST/810ST - Manual (Page 487)

MultiVOIP User Guide Operation & Maintenance
487
The initial configuration step of assigning the voip unit an IP address
must still be done locally using the Windows GUI. However, all
additional configuration can be done via the web GUI.
The content and organization of the web GUI is directly parallel to the
Windows GUI. For each screen in the Windows GUI, there is a
corresponding screen in the web GUI. The fields on each screen are the
same, as well.
The Windows GUI gives access to commands via icons and pulldown
menus whereas the web GUI does not.
The web GUI, however, cannot perform logging in the same direct
mode done in the Windows GUI. However, when the web GUI is used,
logging can be done by email (SMTP).