McDATA 4300 User Manual
Page 178
A-38
McDATA Sphereon 4300 Fabric Switch Installation and Service Manual
Event Code Tables
Event Code: 583
Message:
Loss of signal or loss of synchronization.
Severity:
Major.
Explanation:
An attached server recognized a loss-of-signal condition or a loss-of-synchronization condition that persisted for
more than the specified receiver-transmitter timeout value (R_T_TOV).
Action:
A LIR is generated and sent to the attached server using the reporting procedure defined in T11/99-017v0 (OSI).
If fault isolation at the server does not detect a failure, the problem may be due to a port failure. Go to
to perform fault isolation. In addition, perform a data collection and return the CD to support personnel.
Event Data:
Refer to the T11/99-017v0 document for the specific link incident record format.
Distribution:
Product
Management Server
Host
EFCM Basic
Event Log
System
Error LED
Event Log
Call-Home
Sense Info
Link Incident
Log
✔
Event Code: 584
Message:
Not operational primitive sequence received.
Severity:
Major.
Explanation:
An attached server received a not-operational primitive sequence (NOS).
Action:
A LIR is generated and sent to the attached server using the reporting procedure defined in T11/99-017v0 (OSI).
If fault isolation at the server does not detect a failure, the problem may be due to a port failure. Go to
to perform fault isolation. In addition, perform a data collection and return the CD to support personnel.
Event Data:
Refer to the T11/99-017v0 document for the specific link incident record format.
Distribution:
Product
Management Server
Host
EFCM Basic
Event Log
System
Error LED
Event Log
Call-Home
Sense Info
Link Incident
Log
✔